1. On a separate, empty flash drive, download the attached PVM Firmware(See attachment below: V53RUU.bin).
2. Remove the power plug from the PVM
3. Insert the other flash drive in the USB slot located on the back top of the PVM
4. Press and hold down the power button on the lower right side of the PVM
5. Plug the power back into the PVM
6. Wait until the LED on the lower right of the PVM starts blinking
7. When the LED starts blinking, release the power button
8. The PVM will automatically start downloading the firmware from the flash drive
9. When the download is complete, the PVM will reboot
10. The PVM Firmware Upgrade is now complete
Comments
0 comments
Please sign in to leave a comment.